To Next PageTo Next PageWhy is the wash cycle time delayed on my LG WM1832CW Washer?
The wash cycle time on your LG Washer may vary depending on several factors, including the amount of laundry, water pressure, water temperature, and other usage conditions. The wash time will increase if an imbalance is detected or if the suds removing program operates.
What to do if my LG WM1832CW Washer is making rattling, clanking, thumping, or vibrating noises?
If your LG Washer is making excessive noise, stop the washer and check the drum and drain filter for any obstructions. If the noise persists after restarting, it may indicate an imbalance. Stop the washer and redistribute the wash load evenly. Also, make sure you have removed the shipping bolts (refer to the Installation Instructions for guidance). If the sound continues, try to stop the washer and rearrange the wash load. Adjust the leveling feet to ensure the washer is stable.
Why does my LG Washer show a WATER INLET ERROR?
A WATER INLET ERROR on your LG Washer means that the correct water level (2 level) was not reached within 8 minutes after water was supplied, or the preset water level was not reached within 25 minutes.
What does a water inlet error mean on my LG WM1832CW?
A water inlet error on your LG Washer means that the correct water level isn't reached within the specified time. Ensure that you have correct water level settings.
How to troubleshoot a locked motor error on my LG WM1832CW?
A locked motor error on your LG Washer could stem from several issues: 1. The motor harness might not be properly connected to the stator assembly; ensure these are correctly connected. 2. The electrical contact between the motor harness and the main PWB assembly might be unstable; check and secure these connections. 3. The motor harness between the stator assembly and main PWB assembly might be cut; repair the motor harness. 4. The hall sensor could be defective; consider replacing it.
Why does my LG WM1832CW have an IMBALANCE ERROR?
An IMBALANCE ERROR on your LG Washer can occur for several reasons: the load is too small, the appliance is tilted, laundry is gathered to one side, or non-distributable items are in the drum.
What to do if the load in my LG WM1832CW Washer is too small or out of balance?
To resolve this, simply add one or two similar items to the LG washer to help balance the load. Alternatively, rearrange the load to ensure proper spinning.
How to fix rattling, thumping, or vibrating noises in my LG WM1832CW Washer?
To address rattling, clanking, thumping, or vibrating noises, stop the LG washer and inspect the drum and drain filter. If the noise persists after restarting, it may require professional service. If the sound continues, the washer might be unbalanced. In this case, halt the machine and redistribute the wash load. Ensure you've removed the shipping bolts as per the Installation Instructions. Also, rearrange the wash load, adjust the leveling feet to ensure all four are firmly on the floor, especially during the spin cycle with a load.
What to do if my LG WM1832CW Washer experienced a power failure?
If your LG Washer experienced a power failure, restart the cycle.
What to do if the door of my LG WM1832CW Washer is not completely closed?
Close the door completely. If it is not released, call for service.
General| Type | Front Load |
|---|---|
| Energy Star Certified | Yes |
| Color | White |
| Steam | No |
| Width | 27 inches |
| Spin Speed | 1200 RPM |
