19
OPERATION
OPERATION
Operation Overview
Using the Washing Machine
Before the first wash, select a washing
programme, allow the washing machine to wash
without clothing. This will remove residue and
water from the drum that may have been left
during manufacturing.
1. Sort laundry and load items.
• Sort laundry by fabric type, soil level, colour
and load size as needed. Open the door and
load items into the washing machine.
2.
softener.
• Add the proper amount of detergent to the
detergent dispenser drawer. If desired, add
bleach or fabric softener to the appropriate
areas of the dispenser.
3. Turn on the washing machine.
• Press the Power button to turn on the
washing machine.
4. Choose the desired cycle.
• Press the cycle button repeatedly or turn
the cycle selector knob until the desired
cycle is selected.
• Now select a Temp. (Water Temperature),
Cent. (Spin Speed) and Suciedad (Soil Level).
Pay attention to the care labeling of your
clothes.
5. Begin cycle.
• Press the Start/Pause button to begin the
cycle. The washing machine will agitate
briefly without water to measure the weight
of the load. If the Start/Pause button is not
pressed within 60 minutes, the washing
machine will shut off and all settings will
be lost.
6. End of cycle.
• When the cycle is finished, a melody will
sound. Immediately remove your clothing
from the washing machine to reduce
wrinkling. Check around the door seal when
removing the load for small items that may
be caught in the seal.
Preparing Laundry
Prepare laundry according to the symbols on the
care labels. Sort laundry for best washing results.
Checking a Care Label
• This will tell you about the fabric content of
your garment and how it should be washed.
• Symbols on the care labels.
Symbol Wash / Fabric type
• Normal Wash
• Cotton, Mixed Fabrics
• Easy Care
• Synthetic, Mixed Fabrics
• Special Delicate Wash
• Delicates
• Hand Wash Only
• Wool, Silk
• Do not wash
NOTE
• The numbers in the symbol indicate the
maximum washing temperature.
• The dashes under the symbol give you
information about the type of fabric and the
maximum allowance of mechanical stress.
To Next Page
Loading...
