What to do if my LG WT30VTS6 will not turn ON?
If your LG Washer won't turn on, ensure the power cord is securely plugged into a grounded, 3-prong outlet (120-VAC, 60-Hz). Also, check your house fuse or circuit breaker. Reset the breaker or replace the fuse, without increasing its capacity. If overloading the circuit is the issue, consult a qualified electrician.
Why is my LG Washer not filling properly?
Your LG Washer might not be filling properly due to several reasons. The inlet filters could be clogged, or the inlet hoses might be kinked. Make sure the inlet filters on the fill valves are not clogged and that inlet hoses are not kinked. Ensure both hot and cold water faucets are fully turned on. Close the lid completely, ensuring nothing obstructs it. Check that the hot water supply is connected to the hot inlet valve and the cold water supply to the cold inlet valve. Note that this high-efficiency washer will not normally cover the clothes with water; the fill level is optimized for wash performance.
How to fix LG Washer that will not drain water?
If your LG Washer won't drain water, check for a kinked drain hose or if the drain is located higher than 96 inches above the floor. Make sure the drain hose isn't kinked and is no higher than 8 ft. above the bottom of the washer and no more than 5 ft. away from the washer.
Why does bleach not dispense in my LG WT30VTS6 Washer?
If bleach isn't dispensing in your LG Washer, the bleach dispenser cover might not be properly installed, or the dispenser is dirty or clogged. Ensure the bleach cover is correctly installed and snapped into place before starting the cycle. Clean out the reservoir by lifting out the bleach dispenser cover to remove lint and debris.
Why is my LG WT30VTS6 wrinkling clothes?
Wrinkling can occur in your LG Washer if items are not removed promptly after the cycle, if the washer is overloaded, or if the hot and cold water inlet hoses are reversed. Always remove items as soon as the cycle finishes. While the washer can be fully loaded, avoid tightly packing it; the lid should close easily. Also, check the inlet hose connections to ensure they are correct, as hot water rinses can set wrinkles.
What to do if my LG WT30VTS6 Washer is staining clothes?
If your LG Washer is staining clothes, it could be due to bleach or softener dispensing too soon, adding these directly to the wash load, delayed unloading, or improper sorting. Ensure the dispenser compartment isn't overfilled. Always measure bleach to prevent overfilling (one cup maximum). Close the dispenser drawer gently. Use the dispensers to ensure proper dispensing at the correct time. Remove items promptly after the cycle, and always separate dark colors from light colors and whites. Avoid washing heavily soiled items with lightly soiled ones.
Why does my LG WT30VTS6 make a thumping sound?
A thumping sound in your LG Washer is often normal with heavy wash loads or when the load is out of balance. If the sound persists, the washer is likely out of balance. Stop the washer and redistribute the wash load. Pause the cycle and redistribute the load after the lid unlocks.
What causes rattling and clanking noise in LG WT30VTS6?
Rattling and clanking noises in your LG Washer could be due to foreign objects like keys, coins, or safety pins in the tub. Stop the washer and check the tub for these items. If the noise continues after restarting, call for service.
Why is my LG WT30VTS6 making a vibrating noise?
A vibrating noise in your LG Washer can occur if packaging materials weren't removed, the wash load is unevenly distributed, the leveling feet aren't firmly on the floor, or the floor isn't rigid enough. See the Unpacking and Removing Shipping Material section in the installation requirements section. Pause the cycle and redistribute the load after the lid unlocks. See Leveling the Washer in the Installation Instructions section. Ensure the floor is solid and doesn't flex. See Flooring in the Installation Requirements section.
What to do for poor stain removal with my LG WT30VTS6 Washer?
For poor stain removal in your LG Washer, it may be that you have not selected the proper options or that the stains were previously set. Select the Soak or Stain Care feature to boost cleaning power. Previously washed items with set stains may need hand washing or pre-treating.
To Next Page
General
