Why does bleach dispense prematurely in my LG WT30VTS6 Washer?
Premature dispensing of bleach in your LG Washer happens if the bleach dispenser is filled for a future load or overfilled. Do not store bleach in the dispenser for later use, as it will dispense every load. Overfilling causes immediate dispensing, which can damage items. Always measure bleach, staying below the MAX line on the dispenser; one cup is normal, but never exceed it.
Why is detergent not dispensing completely in my LG WT30VTS6?
Incomplete or no dispensing of detergent in your LG Washer can occur if detergent compartments are clogged from incorrect filling, too much detergent is used, there's insufficient water supply, or it's just normal residue. Make sure detergent and additives are in the correct dispenser compartments. If using liquid detergent, ensure the liquid detergent cup and insert are in place; remove them for powdered detergent. Always fully close the dispenser drawer before starting the cycle. Use the manufacturer’s recommended amount of detergent, diluting it with water to the maximum fill line if needed. Use only HE detergent. Ensure both hot and cold water faucets are fully open. A small amount of detergent residue is normal; clean the dispenser if buildup occurs.
To Next Page
General
