16
3-3. FUNCTION OF EACH BUTTON
·
Delayed finishing time.
·
The time increases when the button is pushed.
· The following settings are indicated as the
button is pushed 1 ▶ 2 ▶3 ▶ 4 ▶ ... 19▶
Reservation off ▶ 1 ...
·
To cancel delay time, turn the power switch off
or push DELAY WASH button until off.
DELAY WASH (Selection)
BUTTON
·
Select to select Wash
Temperature.
·
Pressing the button allows
The selection of TAP COLD
▶COLD ▶ECO WARM
▶WARM▶HOT respectively.
Default setting is Warm.
WASH / TEMP.
Note
The time shown on the display is the estimated cycle time. If the sensors and microprocessor elect to
make changes during the cycle, the display will be adjusted accordingly.
POWER
·
Power on.
·
Push again, power goes off
· Power goes off automatically after the wash
is finished.
·
After turning the power on, the unit will
automatically turn off if nothing is selected.
LOAD SENSING
·
It operates in all cycles.
·
During being detected by the sensor, the LOAD
SENSING LED flashes.
·
It automatically sensing the size of the load.
·
During this step, the washing machine selects an
optimized washing algorithm.
SOIL LEVEL
·
Allows a selection to be make for the
strength of the wash action.
·
Power option selections light up in
sequence as follows Normal ▶ Heavy
▶ Light ▶ Normal as the button is
pushed.
This can be selected for any program.
·
Adjustment can be made while
washing.
·
Default SOIL LEVEL is Normal.
SPIN SPEED
· Spin speed
can be
selected from
No Spin to
Extra high.
Default is
High.
To Next Page
Loading...
Need help?
General
