31OPERATION
ENGLISH
Tub Clean
Use this cycle to clean the tub of your washing
machine. See the Maintenance section.
Turbo Wash™
Adding the Turbo Wash™ option to a cycle reduces
the length of the cycle while maintaining a similar
wash performance.
NOTE
• The Turbo Wash™ option cannot be used with all
cycles.
• Turbo Wash™ defaults On for Normal, Pre
Wash+Normal and Speed Wash cycles.
Control Lock
Use this option to disable the controls. This feature
can prevent children from changing cycles or
operating the machine. The feature does not lock the
lid (door). Once the Control Lock is set, it must be
deactivated before any controls, except the Power
button, can be used. Once the washer has shut off,
the Power button will allow the machine to be turned
on, but the controls will still be locked. When the
controls are locked, will display alternately with
the estimated time remaining.
• Press and hold the Signal button for 3 seconds to
activate or deactivate Control Lock.
NOTE
• Once the controls are locked, they must be
manually unlocked to restore operation.
To Next Page
Loading...
Need help?
General
