Copyright © 2016 - 2017 LG Electronics Inc. All rights
reserved. Only training and service purposes.
9) Disassembly of Door Lock Switch
① Remove the two door lock attachment screws.
② Remove the door switch and remove the attachment tube.
10) Detachment of Bleach Cap Cover
① Remove the Doorlock switch Wire.
② Push the 4 hooks to the top cover hole to remove.
⑨ Remove 19 screws to release the bearing housing.
Pull the housing away from the tub, but do not pry it
with a screwdriver to avoid damage.
28
Bearing Housing
To Next Page
Loading...
Need help?
General
