16
3-3. FUNCTION OF EACH BUTTON
·
Select to select Wash
Temperature.
·
Pressing the button allows
The selection of
▶ COLD▶ WARM▶ HOT
respectively. Default setting
is Warm.
Wash / Temp.
Note
The time shown on the display is the estimated cycle time. If the sensors and microprocessor elect to
make changes during the cycle, the display will be adjusted accordingly.
Load Sensing
· It operates in all cycles.
· During detection by the sensor, the
LOADSENSING LED flashes.
· It automatically senses the size of the load.
· During this step, the washing machine selects
an optimized washing algorithm.
Soil Level
·
Allows a selection to be make for the
strength of the wash action.
·
Power option selections light up in
sequence as follows Normal ▶ Heavy
▶ Light ▶ Normal as the button is
pushed.
This can be selected for any program.
·
Adjustment can be made while
washing.
·
Default SOIL LEVEL is Normal.
Signal
· Volume can
be selected
from High to
Off.
To Next Page
Loading...
