5
6
75
Confirming level
• Place the washer in original position,
confirming the level.
Horizontal setting
• If the washer is not level, adjust the
leveling feet. Turn clockwise to raise,
counterclockwise to lower.
Distance between the drain hose
and the wall
• Distance between the drain hose and
the wall should be more than 4 inches
(10 cm,) and the distance between any
other part and the wall should be more
than 1 inch (2.5 cm.)
Do not install the washer in the following places.
• Where the washer is exposed to direct sunlight.
• Near a heater or heating appliance.
• Where the washer is exposed to freezing temperatures.
• In damp environments such as bathrooms or harmful environments.
Lower
Raise
side to side
front to back
1”
(2.5cm)
24
7
/8”
(63.2 cm)
1”
(2.5cm)
40
1
/8”
(102 cm)
54
3
/4”
(139 cm)
(with open lid)
25 ”
(63.4 cm)
3
2
/4”
(9 cm)
26
3
/8”
(67 cm)
30 ”
(76 cm)
Image is for illustrative
purposes only.
To Next Page
Loading...
