30
OPERATION
EN
Add Item
You can use this option in order to add or remove
clothes after the washing programme has started.
1
Press the
Power
button.
2
Select a washing programme.
3
Press the
Start/Pause
button.
4
Press the
Add Item
button as necessary.
5
Open the door after it unlocks itself and add or
remove necessary clothing items.
6
Close the door and press the
Start/Pause
button.
• For safety reasons, the door remains locked
when the water level or temperature inside of
the drum is high. It is not possible to add clothes
at this time.
Delay End
You can set this function so that the appliance
starts automatically and finishes after a specified
time interval.
1
Press the
Power
button.
2
Select a washing programme.
3
Press the
Delay End
button as necessary.
4
Press the
Start/Pause
button.
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, clothes
and other factors.
• To cancel the function, the
Power
button should
be pressed.
• Avoid using liquid detergent for this function.
Settings
Child Lock
Use this option to disable the controls. This
function can prevent children from changing cycles
or operating the appliance.
• Once this function is set, all buttons are locked
except the
Power
button.
• When the controls are locked,
[L
and the
remaining time are alternatively shown on the
display during the wash while this function is
engaged.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other functions.
Locking the Control Panel
1
Turn on the power.
2
Press and hold the
Delay End
and
Add Item
buttons at the same time for 3 seconds to
activate this function.
• A beeper will sound, and
CL
will appear on
the display.
Unlocking the Control Panel
1
Turn on the power.
2
Press and hold the
Delay End
and
Add Item
buttons at the same time for 3 seconds to
deactivate this function.
Beep On/Off
This appliance plays a melody when it starts and
stops.
• Press and hold the
Rinse+
and
Pre Wash
buttons simultaneously for 3 seconds to
deactivate/activate this function.
To Next Page
Loading...
Need help?
General
