Connecting Peripherals
83
5-5. Using External Drive (LGPC-ODD)
※
External Drive is optional, and so it may not be installed in some models.
▶
Connecting External Drive
Connect the USB cable of the external drive to the USB port of the notebook PC.
▶
Inserting/Ejecting CD
1.
Boot the system and press the
Open Disk Tray
button in front of the external drive.
2.
When the tray is ejected, place the CD at the center of the tray.
Tip
■ The USB cable is on the bottom side of the external drive. Insert your finger as shown in the
following figure and pull out the USB cable.
■ If you want to insert the USB cable back to the external drive, first insert the cable and then insert
the USB connector as shown in the following figure.
To Next Page
Loading...
