LGMG AS0607 - Page 57

USER MANUAL - SS0407E / SS0507E / SS0607E / AS0607 / AS0607W / AS0607WE / AS0607E / AS0608 / AS0608E
57
Chapter 11 - Maintenance
6) Connect the oil inlet of the hydraulic pump to the oil tank.
7) Connect the oil return line of the hydraulic pump to the oil return lter.
8) Fill the tank with hydraulic oil. Do not allow the oil to overow and screw on the tank cap.
9) Start the oil pump to ll the entire hydraulic system with hydraulic oil and eliminate air.
Warning: risk of component damage
Operation without fuel can damage the hydraulic pump. Carefully pump the oil tank when
lling the hydraulic system. Take precautions to protect the hydraulic pump
against erosion.