LGMG SR1018D - Page 66

Elevating Work Platform Operation Manual
59
4
Idling selection button of engine with
indicator
Press this button to select the idling setting of
engine. The indicator is on, indicating that the
middle and high idling has been selected. The
indicator is off, indicating that the middle and low
idling has been selected.
5
LCD reading display
6
Glow plug button
Press this button to activate the glow plug.
7
Ascending button of platform
Press this button to rise up the platform.
8
Enabling button with lifting function
Press this button to activate the lifting function.
9
Enabling button with standby auxiliary
function
Press this button to activate the emergency
descending function.
10
Standby auxiliary descending button
Press this button to activate the emergency
descending function.
11
Descending button of platform
Press this button to activate the emergency
descending function.
12
Buzzer
13
Circuit breaker
14
Circuit breaker
15
Selection of key switch for
platform/off/GCU
Turn the key switch to the platform, and then
PCU will run. Turn the key switch to OFF position,
and then the machine will be shut down. Turn the
key switch to the ground, and then GCU will run.
16
Red "emergency shutdown" button
Push the red "emergency shutdown" button
inward to Off position to stop all functions. Pull
the red "emergency shutdown" button out to On
position to operate the machine.