What to do if my Life Fitness Treadmill has no power?
If your Life Fitness Treadmill has no power, consider these possible causes: * The On/Off switch may be in the wrong position. Turn the switch to the ON position. * The line cord may be improperly seated in the socket. Inspect the power connection at the wall outlet for proper contact. * The line cord may be damaged. Replace the line cord.
How to fix a Life Fitness Treadmill striding belt that slips off-center?
If the striding belt on your Life Fitness Treadmill slips off-center, it might be due to an uneven floor surface. Check the levelers and level the treadmill. Also, check the striding belt and re-tension it as necessary.
What to do if my Life Fitness Treadmill maximum speed is reduced?
There are several reasons why the maximum speed of your Life Fitness Treadmill might be reduced: * The user might be pushing the striding belt. To fix this, instruct users not to push the striding belt in either direction. * There may be a striding belt/deck malfunction. If the deck laminate is worn through or the underside of the striding belt is glazed over (hard, glossy), replace the belt and deck. * There might be an insufficient power source. Plug the treadmill into a 15 amp circuit.
Why is my Life Fitness Treadmill making a rubbing sound from underneath?
A rubbing sound from underneath your Life Fitness Treadmill could be due to a few reasons: * Foreign objects might be stuck underneath the machine. Inspect underneath the striding belt and machine and remove any debris or objects that may be causing interference. * The tinsel might be installed incorrectly. Reposition the tinsel on the outside of the striding belt. * There may be an insufficient power source. Plug the treadmill into a dedicated amp circuit.
What to do if the display does not illuminate on my Life Fitness Treadmill?
If the display on your Life Fitness Treadmill does not illuminate when the machine is powered on, it could be due to a loose 10 pin connection at the display console or wax/lift control board. Check all electrical connections for proper attachment.
What to do if Life Fitness equipment shows abnormally elevated heart rate readings?
Abnormally elevated heart rate readings on Life Fitness equipment can be caused by electromagnetic interference from various sources, including television sets, antennas, cell phones, computers, cars, high voltage power lines, and motor-driven exercise equipment. To resolve this, move the exercise equipment a few inches away from the probable cause, or move the probable cause a few inches away from the exercise equipment, until the heart rate readings are accurate.
General| Type | Treadmill |
|---|---|
| Heart Rate Monitoring | Contact and wireless telemetry |
| Connectivity | Bluetooth |
| Weight Capacity | 400 lbs |
| Maximum User Weight | 400 lbs |
| Power Requirements | 120V |
| Running Surface | 20" x 60" |
Key safety warnings and precautions for the safe operation and maintenance of the equipment.
Instructions for placing, stabilizing, and connecting the Life Fitness cross-trainer.
An introduction to the computerized display console and its capabilities for tailoring workouts.
Detailed explanations of the console's keys and display windows for workout setup and monitoring.
Description of the console-mounted tray for storing items and a rack for books or magazines.
Explains the advantages of using heart rate zones for monitoring intensity and achieving workout results.
Details the Lifepulse™ system sensors and the Polar® telemetry chest strap for heart rate tracking.
Lists and briefly describes the pre-programmed workouts available on the cross-trainer.
Step-by-step guide on starting, selecting, and configuring workouts, including entering personal data.
Detailed explanations of various workout programs like Quick Start, Manual, Random, and Sport Training.
Instructions for creating, saving, and managing custom workout profiles for up to seven users.
Guide to accessing and modifying console settings like workout duration, units, and display options.
Essential tips for keeping the cross-trainer in optimal condition and ensuring longevity.
Schedule for cleaning and inspecting various parts of the equipment to ensure proper operation.
Steps to resolve issues with erratic or missing heart rate readings from the Lifepulse sensors.
Guidance for resolving issues with heart rate readings from the Polar chest strap.
Instructions on how to contact Life Fitness for product support, repairs, and service.
Details the scope of the Life Fitness warranty for materials and workmanship on the product.
Comprehensive technical details including design, power, console, workouts, and dimensions.
To Next Page
