Life Fitness FIT SERIES MULTI PRESS User Manual

FIT SERIES
MULTI PRESS
Part # 7489101
Rev A.
Revision:5/06/031
ASSEMBLY INSTRUCTIONS

Life Fitness FIT SERIES MULTI PRESS Specifications

General

Brand	Life Fitness
Model	FIT SERIES MULTI PRESS
Category	Elliptical Trainer
Language	English

Summary

Assembly Instructions

Step 1: Initial Frame Assembly

Assembles BASE (13) to PRESS FRAME (8) and TOWER (1) using specified hardware.

Step 2: Tighten Frame Connections

Tightens all loose frame connections and secures RH CAPS (53) over RH WASHERS (51).

Step 3: Seat Adjust and Slide Tube Assembly

Slides SEAT ADJUST (6) over SLIDE TUBE (12) after pulling the SPRING PIN.

Step 4: Slide Tube to Frame Assembly

Step 6: Back Pad, Adjust Plates, and Seat Pad Support

Step 7: Back Pad and Seat Pad Attachment

Step 9: Pivot Arm to Rear Upright Assembly

Step 11: Final Adjust Plate and Cable Assembly

Step 12: Press Arm to Pivot Arm Assembly

Step 13: Multi Press Cable Routing (Part 1)

Step 14: Multi Press Cable Routing (Part 2)

Step 15: Multi Press Cable Routing to Tower

Step 16: Guide Rods and Weight Stack Assembly

Installs GUIDE RODS (21), WEIGHT STACK CUSHIONS (20), WEIGHT PLATES (22), HEAD PLATE (24), SHAFT COLLARS (26).

Step 17: Cable Routing and Shaft Collars

Step 18: Weight Stack Adjustment and Labels

Adjusts cable tension, ensures HEAD PLATE (24) sits correctly, and applies WEIGHT STACK LABELS (55).

Safety and Maintenance

Caution and Safety Rules

Details risks and essential safety rules for using the equipment to minimize injury.