Life ARMOR AR024 User Manual

ARMOR
Attuatore elettromeccanico irreversibile per cancelli a battente
Operator
for swing gates
Systeme automatise pour portails a battant
Vers. 2.0-10/2005
Istruzioni e avvertenze per l’installazione, l’uso e la manutenzione
Instructions
and indications for installation and use
Instructions et conseils pour l’installation et l’utilisation
MANUALE DESTINATO ESCLUSIVAMENTE ALL’INSTALLATORE P ROFESSIONALE.
L’installazione deve essere effettuata solo da un installatore professionale qualificato in conformità
alla
legge 46/90.
MANUAL DESTINED TO PROFESSIONAL FITTERS ONLY
Under law 46/90, installation may only be performed by professional fitters.
MANUEL DESTINE EXCLUSIVEMENT AU TECHNICIEN PROFESSI ONNEL PREPOSE
A L’INSTALLATION.
L’installation doit être effectuée uniquement par un technicien professionnel qualifié conformément à
la
loi 46/90.

Life ARMOR AR024 Specifications

General

Operating Temperature	-4°F to 122°F
Maximum Current Draw	5A
Remote Control Frequency	433.92 MHz
Gate Type Compatibility	Swing
Protection Features	Overload protection, overheat protection
Motor Type	DC Motor

Summary

General Information

Manufacturer Data

Intended Use

Product Description

Installation Instructions and Warnings

Preliminary Installation Checks

Essential checks before installation to ensure gate suitability and safety.

Usage Restrictions

Defines limitations for gate type, height, form, and climatic conditions.

Typical Installation Types

Describes two-leaf and single-leaf gate automation setups.

Installing Armor Components

Details on installing the operator, including bracket and arm assembly.

Mechanical End Stops and Regulation

Instructions for mounting and adjusting mechanical end stops.

Operator Release

Procedure for releasing the operator for manual gate movement.

Wiring and Connections

Electric Cables List

Lists necessary cables for installation, compliant with IEC standards.

Power Supply and Earthing

Details on connecting the 230 Vac power supply and essential earthing.

Control Unit Wiring

Instructions for connecting automation devices to the control unit.

Electric Cables Introduction

Guide on introducing electric cables into the operator unit.

Spare Parts

CE Declaration of Conformity