Life ARMOR Series - User Manual

ARMOR
Attuatore elettromeccanico irreversibile per cancelli a battente
Operator
for swing gates
Systeme automatise pour portails a battant
Vers. 2.0-10/2005
Istruzioni e avvertenze per l’installazione, l’uso e la manutenzione
Instructions
and indications for installation and use
Instructions et conseils pour l’installation et l’utilisation
MANUALE DESTINATO ESCLUSIVAMENTE ALL’INSTALLATORE P ROFESSIONALE.
L’installazione deve essere effettuata solo da un installatore professionale qualificato in conformità
alla
legge 46/90.
MANUAL DESTINED TO PROFESSIONAL FITTERS ONLY
Under law 46/90, installation may only be performed by professional fitters.
MANUEL DESTINE EXCLUSIVEMENT AU TECHNICIEN PROFESSI ONNEL PREPOSE
A L’INSTALLATION.
L’installation doit être effectuée uniquement par un technicien professionnel qualifié conformément à
la
loi 46/90.

Summary

Installation

Instructions and Warnings for Installation

Preliminary Checks

Typical Installation

Two-Leaf Systems

Installation guide for two-leaf gates.

Single-Leaf System

Installing Armor Components

Operator Support Bracket Assembly

Assembling and Mounting the Jointed Arm

Assembling the Operator

Jointed Arm Bracket Assembly

Assembly of Mechanical End Stops

End of Stroke Regulation

Operator Release

Wiring and Connections

Preparing the Electrics and Mains Connection

Introducing the Electric Cables into the Operator

Connecting the 230 Vac Power Supply and Earthing

Control Unit Wiring

Life ARMOR Series Specifications