To Next PageTo Next Page
Need help?Do you have a question about the Life OPTIMO OP 2 24 UNI and is the answer not in the manual?
General| Motor voltage | 24 Vdc |
|---|---|
| Encoder | Yes |
| Limit switch type | Magnetic |
| Operating temperature | -20°C to +60°C |
| Power Consumption | 120 W |
| Safety Features | Obstacle detection |
Defines gate type, height, shape, and weather conditions for installation.
Details two-leaf and one-leaf gate automation setup procedures.
Instructions for defining and fixing the rear bracket to the pillar.
Steps for positioning and temporarily clamping the front bracket to the gate leaf.
Guides on unlocking the operator and adjusting its position and stops.
Procedure for manually releasing the operator's transmission for gate movement.
Instructions for wiring the motor supply and connecting power wires to the plug.
Details about the manufacturer, LIFE home integration, and product identification.
Specifies the designed purpose and limitations for the OPTIMO operator.
Broad safety advice applicable to installation, use, and maintenance of the automation.
Guidelines for safely storing the operator to prevent damage and hazards.
Specific safety rules to follow during the operation of the automated gate.
Key safety precautions and requirements for the installation process.
Essential checks to perform before beginning the installation of the operator.
Safety guidelines and responsibilities related to operator maintenance.
