PARTS OF THE RELIEVACUP
Charging Cable
Wellness Recovery Collection 7 6 RelievaCup User Manual Lifepro
Ring Filters
Charging
Jack
Large Cup
Massage
Button
Mode
Button
On/Off
Button
Small Cup
Temperature
Button
Carry Bag
TESTING FOR SKIN SENSITIVITY
Before your first treatment, it is important to perform a skin
sensitivity test to ensure you won’t experience any adverse
reactions to light therapy.
To do a sensitivity test:
1. Press and hold the On/Off button for 3 seconds to turn on
the RelievaCup.
2. Hold the cup to your inner arm, with the edge of the cup
about ½ inch away from your skin. Do not press the cup to
the skin. You are only testing red light sensitivity.
3. The set working time is 20 minutes. Allow the device to
operate for 5 minutes, then press and hold the On/Off
button for 3 seconds to stop the test and turn off the
device.
4. If your skin feels uncomfortable or hot at any point
during the test treatment, stop using the RelievaCup
immediately.
5. Wait at least 6 hours after the sensitivity test. If your
skin becomes red and/or itchy, you may be sensitive to
light therapy, and you should not continue to use the
RelievaCup.
NOTE: See a list of contraindications (people who should not
use this device) on page 18.
To Next Page
Loading...
