EasyManua.ls Logo

Lifepro RUMBLEX PLUS - Easy-Start Setup Guide; Activate the Remote Control; Attach Metal Bars; Attach Resistance Bands

Lifepro RUMBLEX PLUS
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Vibration Therapy Collection 9 8 Rumblex Plus User Manual Lifepro
ACTIVATE THE REMOTE
Remove the remote from the silicone shell
holding it to the wristband.
Remove the back of the remote.
Remove the round plastic insert under the
3V CR2032 battery.
Replace the battery and the back of the remote.
Re-insert the remote into the silicone shell.
ATTACH THE TWO METAL BARS
Rotate the two metal bars on the
underside of the unit to the front.
Use the included hex key and two
screws to secure each bar in place.
ATTACH THE TWO
RESISTANCE BANDS
The resistance bands let you incorporate strength
training into your workout.
Loop the end of a resistance band through
the hole in one the metal bars you just
installed.
Thread the resistance band handle through
the loop and pull tight.
Attach the second resistance band to the other
metal bar.
CONNECT TO POWER
Insert the power cord firmly into the front of the unit.
NOTE: Press forcefully until you feel a click, which indicates that the cord is
securely connected. The power cord fits tightly so it will not loosen during use.
Plug the power cord into an AC outlet.
POWER ON THE RUMBLEX PLUS
Flip the breaker switch on the front of the Rumblex Plus to the ON position.
Press the power button on the control panel or the remote control.
EASY-START SETUP GUIDE
Setup your Lifepro Rumblex Plus in just 5 easy steps:
5
3
4
1
2
HOW IT WORKS
The Rumblex Plus has three powerful, ultra-quiet motors: a lateral motor, a
horizontal/oscillating motor, and a pulsating motor. The three motors combine
to create a unique 4D motion which activates all of your muscle fibers
more efficiently than other exercise products. Create unlimited workout
combination with 7 training modes, 3 workout intensities, and 60 speed
levels.
TRAINING MODES
Low
Medium High
Lateral
• Side-to-Side
WORKOUT INTENSITIES AND SPEED LEVELS
Pulsation
• Pulsating
Oscillation
• Up-Down
3D/Spiral
• Up-Down
• Side-to-Side
4D
• Up-Down
• Pulsating
• Side-to-Side
Oscillating Pulsation
• Up-Down
• Pulsating
Lateral Pulsation
• Side-to-Side
• Pulsating
SPEED
INTENSITY
Remote
Shell
Remote
Remote
Back
Plastic insert
Battery
Wristband
That’s it. Your Rumblex Plus is now ready to use. See OPERATING INSTRUCTIONS and
CHOOSING A PROGRAM on the next pages for details about how to use your Rumblex Plus.

Related product manuals