To Next Page

To Previous Page

CHASER

LCD screen flashing

Solution:

A. Check if the voltage is correct

B. Check that the electronic power supply is 8V

C. Change the controller

D. Change the computer

LCD display faulty

Solution:

1. Turn off power supply

2. Repower the motor, observe if normal or not

3. If not, remove computer and fixed PCB. Check for damage

4. If no damage clean the PCB gold finger position and retest

LCD displaying but

with dysfunction

Solution:

A. Turn off power supply and repower the motor

B. Change the computer.

backlight is not bright

Solution:

A. Turn off the power supply and repower the motor.

B. Start the computer, check if all wires are connected well. Check for

backlight damage

C. Change the computer

A button is not

functioning

Solution:

A. If only one key is not working, open the computer and check the button

for damage

B. Replace the computer

A. If most keys do not work, restart the treadmill

B. Replace the computer

Pulse function is

unresponsive

Solution:

A. Wash your hands, test again

B. Check for damage to the pulse sensor cables as well as the connection

terminal

C. Change PCB or computer

LifeSpan CHASER User Manual

Questions and Answers: