To Next Page

To Previous Page

Assembling Your Treadmill

B. Place the right

cup holder

(6) over the

handlebar and

into the frame as

shown.

C. Loosely install

the two screws

removed in step A.

Once both screws

are installed,

securely tighten

both screws.

D. Repeat steps A

through C for

installing the left

cup holder (7)

Step 8: Remove

Shipping Strap

A. Cut plastic shipping

strap holding deck

frame to base.

5mm Allen

Wrench w/

Phillips

M4 x 8L

(x2)

WARNING: To avoid personal injury, never attempt to pick the treadmill

up and carry it from this position once this strap is cut. The treadmill

should be folded and rolled to the new location or folded and carried to

the new location.

LifeSpan TR5500iM User Manual

Questions and Answers: