LifeSpan VIPER - Safety Key Operation; Stop Key Functions

26
VIPER
7. VALUE PARAMETERS:
SETTING
INITIAL
SETTING INITAIL
VALUE
SETTING RANGE
SHOW RANGE
TIME(MIN:SEC)
0:00
15:00
5:00-99:00
0:00－99:59
GRADE（SEGMENT）
0
0
0-20
0-20
SPEED（KM/H）
1.0
1.0
1.0-20
1.0-20
INCLINE（KM/H）
0
0
0-20
0-20
DISTANCE(KM)
0
1.0
0.5-99.9
0.00－99.9
HEART (PER/MIN)
P
N/A
N/A
50-200
CALORIE(KC)
0
50
10-999
0－999
8. POWER SAVING MODE:
The treadmill automatically enters sleep mode after 30 minutes of inactivity. Press any key on the display to
wake the treadmill.
9. SAFETY KEY FUNCTION:
The machine will not function without the safety key being correctly attached. Pulling out the safety will set
the display into “off” mode.
10. STOP KEY:
Pressing STOP once during your workout will pause your workout and slow your machine to a stop. After 5
minutes, the computer will display “PRESS START TO RESUME OR STOP TO END”.
- Press “stop” twice to stop the machine and end the workout.
- Press “stop” three times for the machine to return to IDLE mode.