Lifetime 90046 - Step 1.3: Extend Legs to Final Position; Step 1.4: Adjust Goal Height

5
Press in the push buttons on the legs on both sides of the Goal. Extend the
legs by sliding them out until the push buttons snap into the last hole on
the leg.
Step
1.3
Raise the front of the Goal to the highest setting by pressing the push
buttons in and sliding the legs until the push buttons snap into the
highest hole on the leg.
Step
1.4
Push Buttons
Push Buttons
BZE
BZE
BZE
Push Buttons
Note: Make sure one hand is placed on the top tube of the assembly and one
hand placed on the side tube near the push button when performing this step.
!