2. INSPECTIONS
Regular inspection of the material lift will ensure that the equipment is operating safely and effectively.
Performing all preventive/predictive maintenance procedures according to the manufacturer’s
recommendations will extend the life of the material lift and help to ensure safe operation for machine
operators.
While inspecting the equipment:
• Perform all daily, quarterly and/or annual
inspections according to the
manufacturer’s recommendations.
• Perform all quarterly and/or annual
preventive/predictive maintenance
procedures according to the
manufacturer’s recommendations.
• Create a record of all inspections and/or
maintenance performed using the
Scheduled Maintenance and Inspection
Checklist provided in the back of this
manual.
DAILY INSPECTIONS
Perform each of the following inspections daily or
before each use of the material lift:
❑ Verify that the MLC Construction Pro
Series Operator’s Manual is in the storage
container attached to the material lift. The
pages must be legible and in good
condition.
❑ Perform a visual inspection of the material
lift for wear or damage.
❑ Perform a function test on the material lift
to verify winch is operating correctly, holds
a load, and that the Fork Carriage and
masts raise and lower in the correct
sequence.
To Next Page
Loading...