QUARTERLY INSPECTIONS
Perform the following inspections quarterly or after every 100 hours of operation. Perform these inspections
in addition to all daily inspections:
NOTE: It is important to perform all the inspections listed to ensure the material lift can be used correctly and
safely. Failure to perform the inspections listed may result in injury or death.
❑ Visually inspect the welds for cracks, excessive wear, or corrosion.
❑ Inspect the welds on:
▪ Fork and other load lifting attachment(s)
▪ Base
▪ Legs
▪ Stabilizers
▪ Transport Wheel Option (if equipped)
▪ Winch mounting plate
▪ Smart-Set adjustment system
❑ Clean the masts.
❑ Inspect the winch.
❑ Lubricate the winch.
To Next Page
Loading...