6. Safety instructions
6.1 Assembly
Correct assembling of legs and back rest: Incorrect assembling of legs and back rest:
Observe green marks on right-hand side Observe red marks on left-hand side
6.2 Avoiding personal injury.
Although the Raizer comes fitted with various safety features never use it if
unintended persons or animals are close by, as there may otherwise be a risk of
crushing. Never allow children to play with the Raizer.
6.3 Overload.
In order to avoid damage to the device in the event of overload (max. 150kg / 330.7 lbs), it is
fitted with an overload cut out, which when triggered halts the lifting chair and issues an
audible alarm. In the event of overload, run the chair down to the horizontal position/floor
level.
With heavy loads on the Raizer, the chair may sink slowly if it is not in operation – this is
completely normal. For safety reasons the Raizer is designed to sink slowly under heavy loads.
This has been introduced in order to avoid mechanical breakage in the event of overload.
To Next Page
Loading...
