To Next PageTo Next Page
Need help?Do you have a question about the Lightmaxx Shaft 5R and is the answer not in the manual?
General| Type | Moving Head |
|---|---|
| Power Consumption | 250W |
| Input Voltage | 100-240V AC, 50/60Hz |
| Pan Movement/Range | 540° |
| Tilt Movement/Range | 270° |
| Focus | Motorized |
| Beam Angle | 2.5° |
| Light Source | Discharge |
| DMX Channels | 16 |
| Color Wheel | 14 colors + open |
| Gobo Wheel | 17 gobos + open |
| Prism | 8-facet |
| Dimmer | 0-100% |
| Strobe | Yes |
| Control | DMX, Master/Slave, Sound Active |
| Power Supply | Internal |
Guidelines for safe installation, mounting surfaces, and required distances for optimal safety.
Specifies maximum operating temperatures, IP rating, and safe electrical connection procedures.
Safety instructions for maintenance, cleaning, and lamp replacement.
Lists the items provided with the moving head, including manual and power supply.
Step-by-step guide and safety cautions for installing the mounting bracket.
Details on power supply requirements, fuse types, and electrical connection.
Information on DMX connectivity, cable usage, and safety cautions.
Specifies compatible bulb types and provides cautions for installation.
Detailed steps and safety warnings for replacing the lamp.
Explanation of the SELECT, DOWN, UP, and ENTER button functionalities.
How to activate the display reversal for upside-down mounting.
Diagram illustrating access to DMX Address Set, Info, Options, and Setting menus.
Listing of sub-menus like Pan Inverse, Language, Display, and Factory set.
Explanation of lamp control, reset functions, DMX values, and program execution.
Details on advanced functions like Motor correction and fan speed monitoring.
Details on language, display settings, factory reset, and lamp on/off controls.
Covers DMX value display, program run, and motor correction settings.
Mapping of DMX values to color wheel effects and strobe modes.
Details on how DMX values control the dimmer function.
DMX value mappings for gobo selection, prism rotation, and effect movement.
DMX control for X/Y axis movement, fine adjustments, and atomization.
DMX control for macro functions and resetting various device parameters.
DMX control for bulb switching and XY axle speed adjustments.
Instructions for cleaning optical components safely and effectively.
Procedures for cleaning fans, air holes, and the light body.
Gobo plate lubrication and guidelines for professional maintenance.
Troubleshooting for bulb not lighting up or beam becoming dim.
Diagnosing motor failures, communication loss, and control issues.
Addressing halo effects, intermittent operation, and dusty fans.
