13
Charging the Flexmike
BEFORE USE, THE FLEXMIKE SHOULD BE CHARGED
It will take 5-6 hours for the Flexmike to obtain a full charge. A fully charged
Flexmike will last for up to 8 hours of use. If microphones are used daily, they
should be charged each night.
Replacement lithium polymer battery packs may only be purchased through
Lightspeed (part # L3.7V).
ATTACH LANYARD
Hang the Flexmike on the lanyard opposite
the magnetic clasp.
CONNECT CRADLE CHARGER
Plug power cord into the cradle charger and
then plug the AC end into an electrical outlet.
CHARGE FLEXMIKE
Place the microphones into the cradle charger. The
power status light will glow red when it is charging.
When charging is complete, the power status light
will glow green.
It takes about 5-6 hours to fully charge the
microphone battery.
CHARGING IN PROGRESS
CHARGING COMPLETE
SET-UP & OPERATION
To Next Page
Loading...
