Lightspeed 975 - Media Connector Controls and Indicators (Optional)

25
OPTIONAL COMPONENTS
1. AUDIO INPUTS: 3.5mm stereo connectors for connecting classroom
audio sources to be played through audio system.
2. AUDIO OUTPUTS: 3.5mm stereo connectors for connecting to an
assisted listening device (ALD) or to a computer for recording.
3. USB INPUT: Plug the USB-C end of the power cable into this USB port
on the Media Connector.
• The USB port supplies power to Media Connector when connected
to the Media Connector power supply, or from a laptop.
• It also acts as an input for a digital audio when connected to an
audio source. Note that when the USB is used for audio input, the
other four audio input jacks are not operational.
1 2 3
BACK PANEL
Media Connector Controls and Indicators
(Optional)
USB
5V / 0.2A
Audio Inputs
432
1
Audio Outputs
2
1