Fitting Your Headset
Fitting your headset properly is the key to comfortable
use and superior Active Noise Reduction (ANR)
capabilities. To gain peak performance from
the ANR feature it is necessary to have a solid
seal around your entire ear combined with a
symmetrical t on your head.
The following tips will assist you in achieving the
proper t.
A. Fit your ears entirely within the ear cups
providing a solid seal.
B. Rest the headband lightly on top of your head with
the right and left sliders extended to equal lengths.
Getting Started
4
C. Position the microphone inch from your mouth,
with the gain adjustment cap facing away from
you (visible when you remove the mic mu).
This side of the microphone
should face away from you.
To Next Page
