Lightspeed Zulu.2 - Zulu.2 Controller Overview

Controller
A. Power indicator LED: Flashes GREEN when power
is supplied to Zulu.2 and batteries are strong.
Flashes RED when batteries are low.
B. Power button: Powers on headset, turning on
Active Noise Reduction (ANR). Press button once
to turn Zulu.2 on; press and hold to turn Zulu.2 o.
To toggle the LED brightness from bright to dim
quickly press the power button twice.
C. Volume control: Controls audio panel volume
with individual sliders for each ear. Does not
aect the volume of auxiliary devices.
D. Bluetooth indicator LED: Flashes BLUE when
Bluetooth mode is on and RED when Bluetooth
is being turned o. In pairing mode, ashes
alternating RED and BLUE.
E. Bluetooth power button: Turns on and o
theBluetoothsignalandcontrolsBluetooth-
connected devices.
F. Auxiliary input jack: Provides a wired input for
audio and cell phone devices.
G. Bluetooth volume buttons: Controls the volume
of Bluetooth devices.
H. ComPriority button: When enabled, automatically
quiets music and audio from auxiliary devices
during radio communications.
Getting Started
6