Battery Installation
The standard Zulu.2, Zulu.2:CD and Zulu.2:C battery–
powered headsets require two AA batteries (included).
Use alkaline batteries for best performance.
A. Open the controller battery/DIP switch door
by either pressing down on the circle icon or
by pulling open the door along the notched
edges. Insert two AA batteries with the correct
polarity positioning.
B. The LED ashes GREEN when charged batteries
are in use and the power is on.
C. When batteries begin to run low the power LED
ashes RED. If the LED ashes RED during ight
the headset will continue to operate. Install new
batteries as soon as possible at any indication of
low batteries.
Battery Types
Use two “AA” alkaline or lithium batteries. Lithium
batteries may provide improved battery life in
colder temperatures. We do not recommend using
rechargeable batteries or mixing battery types
and brands.
Battery Life
A set of batteries can provide up to 40 hours of
power. However, heavy Bluetooth usage can
signicantly reduce battery life. Under quiet
conditions Zulu.2 will auto shut o approximately
ve minutes after the headset is removed from
your head.
Getting Started
5
To Next Page
Loading...
