25
Visual Alarm
Your TME is equipped with a visual alarm which will allow you to know if there is
an issue with your Roof Top Unit (RTU).
This helps in preventing a small problem from becoming a large one, thus saving
time, money and RTU down-time.
If the RTU has an alarm signal connection, when something is not working prop-
erly, it will send an alarm signal to the thermostat.
When this occurs a red ashing light will be visible in the Setback window.
If this occurs contact your maintenance department so the issue can be
corrected.
The visual alarm will continue to ash until the RTU issue has been corrected
and/or the RTU signal reset.
To Next Page
Loading...