6
System Layout
The Lightstat TME is used as a stand-alone thermostat to control a single HVAC
system. Do not attempt to control more than one HVAC unit with a Lightstat
TME.
You can add a Remote Room Sensor to sense temperature remotely.
Two Averaging Remote Room Sensors may be used to provide an average
Room Temperature (Order as Averaging Sensors).
And you can add a Supply Air Sensor to check temperature of the air coming
from your HVAC system.
Note: All wiring should be minimum #18 AWG. Shielding is not required.
To Next Page
Loading...
