Need help?Do you have a question about the Lightware DVI-TP-TX200DL and is the answer not in the manual?
General| Category | Receiver |
|---|---|
| Model | DVI-TP-TX200DL |
| Manufacturer | Lightware |
| Input Interface | DVI |
| Output Interface | TP |
| Maximum Resolution | 1920x1200 |
| Weight | 0.2 kg |
| Operating Temperature | 0°C to +40°C |
| Storage Temperature | -20°C to +70°C |
| Humidity | 10% to 90% non-condensing |
Steps for powering the transmitter and interpreting initial LED status.
Procedure for capturing and storing EDID from a display device.
How to select and change EDID memory addresses for emulation.
Steps for powering the receiver and interpreting initial LED status.
Guide to setting optimal signal equalization using automatic or manual modes.
Verifying signal presence and equalization settings on the receiver.
Confirming the Hotplug signal from the connected display device.
Identifying and resolving issues stemming from EDID communication.
Technical data on video standards, color depth, data rate, and resolutions.
To Next Page
