LiGo BT - Using the Talk Back Feature; Two-Way Intercom Functionality

To Next Page

To Previous Page

Using your BT Digital Baby Monitor & Paciﬁer

If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp

Be careful not to accidentally

switch the torch feature on

as Mute All is automatically

activated when this is done.

If the

or buttons

are pressed whilst Mute All

or Mute Low has been set

then Mute All or Low will

be switched off and the

loudspeaker volume will return

to Level 3 automatically.

Mute All feature – Parent unit only

The Mute All feature prevents any sound coming

from the Parent unit loudspeaker. With Mute All

on you can still monitor your baby using the Baby

sound level LED indicators (page 18) and the Crying

Alert (page 36).

1. To switch Mute All on, press the

button located

on the top of the unit. The Mute indicator will

illuminated red.

2. To switch Mute All off, press the

button again.

The red Mute indicator will switch off.

Mute Low – Parent unit only

For discreet operation when you do not wish to hear

any low level sounds, you can still monitor your baby

using the Baby sound level LED indicators (page 18).

When Mute Low is switched on, any sounds from

the Baby unit to the Parent unit will be muted

unless a sound is made above a set level. The set

level are sounds that are louder than the ﬁrst two

green LEDs would register, as described in ‘Baby

sound level LED indicators on page 18.