Using your BT Digital Baby Monitor & Pacifier
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
22
When the Torch is switched
on it will automatically switch
Mute All on as well. If you then
press the button Mute will
be disabled and the Torch will
remain on. When the Torch is
switched off, the previous Mute
setting will be restored (No
Mute, Mute All or Mute Low).
Find
You can press the button on the Baby unit
to make the Parent unit sound an alert to help
you find it if it’s been misplaced. If the Parent unit
loudspeaker volume had been Muted (or set to
volume off), the volume level will be reset to the
default setting of Level 3.
1. Press
on the Baby unit. The paging alert will
sound at the Parent unit and the display will show
Here I am!
2. To stop the alert, press any button on the Parent
unit or press the
button again on the Baby
unit. If no button is pressed after 2 minutes then
the alert will automatically stop.
Torch
The Parent unit has a high intensity white LED torch
that can be used when the Parent unit is switched
on or off.
1. Press the
button located on the back of the
Parent unit to switch the Torch on and off.
To Next Page
Loading...