LiGo BT - Nightlight; Switch Nightlight On;Off Using the Baby Unit; Switch Nightlight On;Off Using the Parent Unit

Using your BT Digital Baby Monitor & Pacifier
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
26
The Baby unit must be switched
on for the nightlight to work,
but need not be linked to the
Parent unit.
To adjust the brightness level
or set the Nightlight timer,
see page 27.
You can also switch the
Nightlight on/off using the
Parent unit menu using the
Nightlight menu option.
Nightlight
You can set a comforting nightlight on the Baby
unit. There are 3 brightness levels to choose from
and you can set a period of time for the nightlight
to illuminate.
Switch nightlight on/off using the Baby unit
1. To switch on, press the
button.
2. To switch off, press the
button again.
Switch nightlight on/off using the Parent unit
1. To switch on, press the
button. The display
will briefly show Light On and the Baby unit
nightlight will illuminate.
2. To switch off, press the
button. The display
will briefly show Light Off and the nightlight will
turn off.