3. MENU SETTING
Before setting the functions, please make sure the device is
connected correctly.
3-1. F1~F2 User-definable function buttons:
Select "MEMU -- SYSTEM -- F1 Configuration/F2 Configuration" to
custom F1 / F2 shortcut settings. Then left or right sliding the dial to
choose options.
Select option via sliding to the left or right.
Press to confirm option as default, then press EXIT to exit.
Functions of F1-F2 buttons can also be customized: Center Marker,
Aspect Marker, Check Filed, Underscan, Scan, Aspect, DSLR,
Freeze, H/V Delay, Peaking, False Color, Exposure, Histogram,
Level Meter.
F1-F2：2 user-definable function buttons
Default function:
F1：Peaking F2：Level Meter
3-2. Dial
Sliding the dial to activate the brightness bar when not under the
menu display
Slide the dial to adjust the value of option directly.
Press “EXIT” to exit if accidentally enter the menu.
After enter the Volume menu, press the dial to select among of
Brightness, Contrast, Saturation, Tint, Sharpness, Volume, and Exit.
3-3. MENU
Operation
When power on, press dial on the device, the menu of function setting
will display on the screen.
Sliding the dial to select the menu option;
Then press the dial to confirm;
Press “EXIT” button to exit menu.
To Next Page
Loading...
Need help?
General
