- R/G/B Gain
Adjust the R/G/B Gain of the current Color Temperature from 0 to 255. Default value:
128.
- R/G/B Offset
Adjust the R/G/B Offset of the current Color Temperature from 0 to 511. Default
value: 256.
3.2.3 LUT
- Camera LUT
Adjust the camera LUT model among [Off], [Def. LUT], [User LUT].
- Def LUT
Adjust the def LUT model among SLog2ToLC-709, SLog2ToLC-709TA,
SLog2ToSLog2-709, SLog2ToCine+709, SLog3ToLC-709, SLog3ToLC-709TA,
SLog3ToSLog2-709, SLog3ToCine+709.
- User LUT
- [User Log mode]: Use this item to choose one of the User Log modes (1-6). Please
install the User Log as following steps:
- The User Log must be named with .cube in the suffix.
Note! The device only supports the format of User Log: 17x17x17 / 33x33x33; Data
order is BGR; Table order is BGR. If the format does not meet the requirement, please
use tool “Lut Tool.exe” to transform it.
-Naming the User Log as User1-User6.cube, then copy the user Log into USB flash
To Next Page
Loading...
Need help?
General
