help.li.me/hc/requests/new
• Do not ride your scooter during and after wet or inclement weather conditions like rain, snow and hail. You should also avoid
riding your scooter on roads that you know are in rough shape and/or that have ongoing construction
• Before each use, conduct a safety inspection of the scooter, including:
1. Hand Brake: Test the brakes by trying to roll your scooter forward and back while squeezing the brake lever. The back
wheel should not rotate
2. Throttle: Test the throttle by applying pressure downward and then release the pressure. Check that it springs back to its
original position.
3. Damage: Check the Frame, Stem, Handlebars, and Baseboard for any dents, cracks, or signs of other damage
4. Steering: Check to make sure the steering is handling properly by rotating the handlebars to the left and right.
5. Lights: Make sure that your front and rear lights are on (they should turn on automatically when you unlock your scooter
with the app)
6. Wheels: Make sure the wheels are in good condition and check for any signs of excessive tread wear
7. Screws: Make sure the stem is securely attached to the base of the scooter. If you notice any play in the stem (i.e.
swaying or moving back-and-forth) you likely need to tighten the H6 screws you installed during assembly with the Allen
Key (see assembly instructions)
8. Error Codes: Check the Display for error codes. If any are present other than 02E, do not ride the scooter and the
contact Customer Support (please refer to the error codes section on page 23 for more information on error codes)
• WARNING: If you check your scooter and identify any component that is not functioning properly, notice damage or
excessive wear and tear, or you encounter an error code other than E02, do not ride your scooter and please contact
Customer Support via our webform, available at
• To clean your Lime scooter, you can wipe it down with a soft damp cloth or towel and/or scrub it with a soft bristled
toothbrush. Be sure that you do not use corrosive substances/cleaning solutions because they could damage your Lime
Scooter (don’t use gasoline, kerosene, acetone, alcohol, bleach etc.
• You are responsible for monitoring the condition of your scooter, maintaining the components and using only authorized
replacement parts with installation performed by individuals authorized by Lime to service your scooter.
• Do not modify the scooter. Doing so will void any applicable warranties and may put you at increased risk of serious injury or
death.
WARNING
Maintaining your Lime E-Scooter
& Safety Inspection
14
To Next Page
Loading...