Page 30
Pump Care and Cleaning
Pump Care and Cleaning
When pump is shared by multiple users, such as in the hospital, wipe
unit with a damp cloth containing a germicidal detergent. Dry with
a soft cloth. Wash holders in detergent, using germicide when more
than one person uses them.
DO NOT IMMERSE PUMP IN WATER.
When to change the lter
1. If milk enters lter.
2. If the lter gets wet.
How to change the lter
1. Remove lter (9) from lter connector (5) on the pump and from
white silicone tube (10).
2. Press short white silicone tube (10) onto narrow end of new lter
(9). The end of the lter and Y connector (11) should be touching.
If they do not touch, the tubing could kink and stop the vacuum.
3. Insert large end of new lter (9) into lter connector (5).
Note: The lter is designed to last the duration of your current breast-
feeding goals.
Transportation Information
Temperature between 40 F degree to 130 F degrees
Humidity: 75%
Altitude: 35,000 feet
To Next Page
Loading...
