Page 18
Display Functions and Indications
remember to turn off pump rst before removing breast cups from
breast. This will minimize risk for back ow of milk.
Situation “B”
You may see moisture accumulate in the tubing. This is normal due
to the difference in body temperature versus room temperature. If
this occurs after you have nished pumping, remove the tubing from
breast cup assembly caps, let the tubing hang down, and use Dry
Mode. See how to use Dry Mode on page 14.
Situation “C”
If suction feels weaker on one side, see troubleshooting table
Problem C on page 34.
To Next Page
Loading...
