Mounting brackets MBJ1, MBJ2, MBJ3
The charger CHJ2 has been specially designed for use as a wall-charger for
the JUMBO system.
The CHJ2 charger is a Switch Mode Power Supply (SMPS) version which
makes charging of the batteries more efficient.
MBJ1
For use together with CBJ2, CBJC, CHJ2 and BAJ. I.e.
when combining control box, charger and battery pack
MBJ1 is to be used
MBJ2
For use together with CBJ2, CBJC and BAJ. I.e. when
combining control box and battery pack MBJ2 has to be
used.
MBJ3
For use together with CHJ2 and BAJ. I.e. when combining
charger and battery pack MBJ3 has to be used.
Information
• All three order numbers for brackets include matching screws (IPX1, IPXX and IPX5 are delivered with
stainless screws)
• IP protection according to mounting instructions in sections CBJ2 and CBJ Care.
To Next Page
Loading...