Need help?Do you have a question about the Lincoln Electric IDEALARC TIG-250/250 and is the answer not in the manual?
General| Phase | Single Phase |
|---|---|
| Output Current Range (TIG) | 5-250A |
| Output Current Range (Stick) | 20-250A |
| Rated Output | 250A/30V/60% |
| Processes | TIG, Stick |
| Open Circuit Voltage | 80V |
| Duty Cycle (TIG/Stick) | 60% at 250A |
Emphasis on user responsibility for safe installation and operation.
Precautions to prevent electric shock during welding operations.
Risks associated with welding fumes and gases and ventilation.
Prevention of fires and explosions caused by welding sparks.
Protection of eyes and skin from arc rays.
Safe handling and storage procedures for compressed gas cylinders.
Safety guidelines for electrically powered welding equipment.
Safety precautions for operating and maintaining engine-driven welders.
Guidelines for setting up the welding equipment.
Measures to minimize radio and TV interference from HF generator.
Instructions for operating the welding machine.
Step-by-step procedure for TIG welding operations.
Step-by-step procedure for stick electrode welding.
Procedures for maintaining the welding equipment.
Diagnosing and resolving common welder problems.
To Next Page