• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •
OPERATORʼS MANUAL
MANUAL DE OPERACIÓN
MANUEL DE LʼOPÉRATEUR
ISO 9001
CERTIFICATE NUMBER: 30273
Designed and Manufactured Under a
Quality Program Certified by
ABS Quality Evaluations, Inc.
to ISO 9001 Requirements.
QMS
ANSI RAB
Copyright © Lincoln Global Inc.
POWER MIG 180 DUAL
IMT10089
September, 2011
For use with machines having Code Numbers:
11659
TABLE OF CONTENTS
Installation . . . . . . . . . . . . . . . . . . .Section A
Technical Specifications . . . . . . . . . . . . . .A-1
Safety Precautions . . . . . . . . . . . . . . . . . .A-1
Location . . . . . . . . . . . . . . . . . . . . . . . . .A-1
Stacking . . . . . . . . . . . . . . . . . . . . . . . . .A-1
Tilting . . . . . . . . . . . . . . . . . . . . . . . . . . .A-1
Identify and Locate Components
. . . . . . . . .A-2
Operation . . . . . . . . . . . . . . . . . . . .Section B
Safety and Product Description . . . . . . . . .B-1
Controls and Settings . . . . . . . . . . . . .B-2, B-3
Drive Roll and Wire Guides Table . . . . . . .B-4
Setting Up and Making a
Flux-Cored Weld . . . . . . . . . . .B-4 thru B-6
Setting Up and Making a MIG Weld and
Install Shielding Gas . . . . . . . .B-7 thru B-10
Setting Up and Making a Aluminum Weld B-11
Accessories . . . . . . . . . . . . . . . . . .Section C
Optional Accessories . . . . . . . . . . . . . . . . .C-1
Utility Carts . . . . . . . . . . . . . . . . . . . .C-2, C-3
Maintenance . . . . . . . . . . . . . . . . .Section D
Safety Precautions . . . . . . . . . . . . . . . . . .D-1
Wire Feed Compartment, Fan Motor, Wire Reel
Maintenance . . . . . . . . . . . . . . . . . . . . . .D-1
Gun And Cable Maintenance . . . . . . . . . .D-1
Overload Protection . . . . . . . . . . . . . . . . . .D-2
Component Replacement Procedures . . .D-2
Troubleshooting . . . . . . . . . . . . . .Section E
Safety Precautions . . . . . . . . . . . . . . . . . .E-1
How to Use Troubleshooting Guide . . . . . .E-1
Troubleshooting Guide . . . . . . . .E-2 thru E-3
Wiring Diagram and Dimension Print
Section F
Parts Pages . . . . . . . . . . . . . .P-673, P-202-E
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However,
your overall safety can be
increased by proper installation
... and thoughtful operation on
your part. DO NOT INSTALL,
OPERATE OR REPAIR THIS
EQUIPMENT WITHOUT READ-
ING THIS MANUAL AND THE
SAFETY PRECAUTIONS CON-
TAINED THROUGHOUT. And,
most importantly, think before
you act and be careful.
®
To Next Page
Need help?
General
