Lincoln Electric POWER MIGTM 215 User Manual

POWER MIG
™
215
OPERATOR’S MANUAL
IM828-A
April, 2007
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However, your
overall safety can be increased by
proper installation ... and thought-
ful operation on your part. DO
NOT INSTALL, OPERATE OR
REPAIR THIS EQUIPMENT
WITHOUT READING THIS
MANUAL AND THE SAFETY
PRECAUTIONS CONTAINED
THROUGHOUT. And, most
importantly, think before you act
and be careful.
For use with machine Code Numbers
1111007700,, 1111009999,, 1111224477
For use with machine Code Numbers
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •
Copyright © 2007 Lincoln Global Inc.
R
C
UL

Lincoln Electric POWER MIGTM 215 Specifications

General

Input Phase	Single Phase
Input Frequency	60 Hz
Output Amperage Range (MIG)	30 - 215 A
Welding Process	MIG, Stick, TIG
Input Voltage	230 V
Rated Output (MIG)	200 A
Output Amperage Range (TIG)	Not Applicable
Duty Cycle (TIG)	Not Applicable
Weight	38 lbs
Wire Feed Speed Range	50 - 700 IPM
Wire Size Range (MIG)	.023 - .035 in
Electrode Size Range (Stick)	1/16-5/32 in (1.6-4.0 mm)