Lincoln Electric SAE-400 User Manual

Operator’s Manual
SAE-400
®
Register your machine:
www.lincolnelectric.com/register
Authorized Service and Distributor Locator:
www.lincolnelectric.com/locator
IM10027-C | Issue D ate Aug-15
© Lincoln Global, Inc. All Rights Reserved.
For use with machines having Code Numbers:
11605, 11807, 11966, 12311
Save for future reference
Date Purchased
Code: (ex: 10859)
Serial: (ex: U1060512345)

Lincoln Electric SAE-400 Specifications

General

Type	Engine-Driven Welding Generator
Duty Cycle	100%
Max Output	400 Amps
Welding Current Range	40-400 Amps
Fuel	Gasoline or Diesel
Dimensions	30 in x 30 in

Summary

Safety and Installation

General Safety Guidelines

Essential safety practices for operating and maintaining welding equipment.

Specific Hazard Warnings

Covers electrical, fume, fire, explosion, cylinder, and EMF hazards.

Installation Procedures and Safety

Covers technical specs, safety, grounding, and engine pre-operation.

Operation

Operational Safety Instructions

Essential safety guidelines to follow while operating the welder.

Engine and Welder Controls

How to operate engine controls, idler, welder settings, and current adjustment.

Auxiliary Power and Engine Operation

Using auxiliary power, starting/stopping engine, and fuel consumption.

Maintenance, Troubleshooting, and Support

Accessories and Maintenance

Optional accessories, routine/periodic maintenance, and component care.

Troubleshooting and Customer Assistance

Guide for resolving issues and information on customer support.