Need help?Do you have a question about the Lincoln Electric Torchmate 2X4 Growth ACCUMOVE 2 Series and is the answer not in the manual?
General| Drive System | AC Brushless |
|---|---|
| Software | Torchmate CAD/CAM |
| Cutting Area | 2 ft x 4 ft |
| Cutting Technology | Plasma, oxy-fuel |
| Warranty | 2 year |
Provides phone, fax, and email for technical assistance during building and operation, including support hours.
Provides initial safety warnings and critical precautions for operating the equipment, emphasizing reading the manual.
Details risks and prevention methods related to electrical shock during operation and maintenance.
Warns about plasma arc rays and hazards from fumes/gases, specifying protective measures and ventilation.
Addresses fire and explosion hazards from sparks, hot materials, and flammable substances, including cylinder safety.
Covers the mechanical assembly of the table sides, frame, and gantry, including initial adjustments.
Details connecting the controller, software setup, and initial calibration for table operation.
Details wiring connections for Lincoln Electric plasma cutters using the CNC interface cable.
Guides wiring for non-Lincoln plasma cutters, including VFC and raw arc voltage connections.
To Next Page
